Uncompressing Linux................................................. done, booting the kernel. Linux version 2.4.20_mvl31 (release@cm07se1) (gcc version 3.3.1) #1 Fri Mar 2 14:28:13 PST 2007 CPU: XScale-IXP4xx/IXC11xx [690541f1] revision 1 (ARMv5TE) CPU: D undefined 5 cache CPU: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets CPU: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets Machine: Intel IXDP425 Development Platform On node 0 totalpages: 32768 zone(0): 16384 pages. zone(1): 16384 pages. zone(2): 0 pages. Kernel command line: console=ttyS1,115200 root=/dev/mtdblock7 Calibrating delay loop... 262.96 BogoMIPS Memory: 128MB = 128MB total Memory: 127996KB available (1154K code, 249K data, 216K init) XScale Cache/TLB Locking Copyright(c) 2001 MontaVista Software, Inc. XScale cache_lock_init called Calling consistent alloc low_level_page initialized low_level_page @ 0xc8800000 icache_lock_fn @ 0xc8800080 dcache_lock_fn @ 0xc88000a0 icache_unlock_fn @ 0xc8800098 dcache_unlock_fn @ 0xc88000f0 Initializing TLB locking TLB locking initialized Dentry cache hash table entries: 16384 (order: 5, 131072 bytes) Inode cache hash table entries: 8192 (order: 4, 65536 bytes) Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) POSIX conformance testing by UNIFIX PCI: bus0: Fast back to back transfers enabled Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket LSP Revision 29 Starting kswapd Disabling the Out Of Memory Killer JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc. i2c-core.o: i2c core module version 2.6.2 (20011118) i2c-dev.o: i2c /dev entries driver module version 2.6.2 (20011118) i2c-algo-bit.o: i2c bit algorithm module version 2.6.2 (20011118) i2c-proc.o version 2.6.2 (20011118) pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x0000 (irq = 15) is a XSCALE UART ttyS01 at 0x0000 (irq = 13) is a XSCALE UART Loaded PCF8594C2 I2C EEPROM NVRAM driver RAMDISK driver initialized: 16 RAM disks of 20000K size 1024 blocksize IXP425 Flash: Found 1 x 1MiB AMD AM29LV800BT at 0x0 RedBoot partition parsing not available cmdlinepart partition parsing not available IXP425 Flash: Using static MTD partitions. Creating 6 MTD partitions on "IXP425 Flash": Initializing TC58DVM82A... Scanning for TC58DVM82A... NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Using static partition definition Creating 5 MTD partitions on "NAND 64MiB 3,3V 8-bit": NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 1024 buckets, 8Kbytes TCP: Hash tables configured (established 8192 bind 16384) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Initializing Cryptographic API NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com Empty flash at 0x00d659c8 ends at 0x00d65a00 VFS: Mounted root (jffs2 filesystem). Freeing init memory: 216K Empty flash at 0x0015a6dc ends at 0x0015a800 jffs2_scan_eraseblock(): Node at 0x0046f1fc {0x1985, 0xe002, 0x1985e002) has invalid CRC 0x00000044 (calculated 0xafc1f409) jffs2_scan_eraseblock(): Node at 0x00bf1bfc {0x1985, 0xe001, 0x1985e002) has invalid CRC 0x00000044 (calculated 0xe8618ed9) Empty flash at 0x01364c34 ends at 0x01364e00 jffs2_get_inode_nodes(): Data CRC failed on node at 0x0015a168: Read 0x3142726f, calculated 0xf551d993 jffs2_get_inode_nodes(): Data CRC failed on node at 0x009fc7c4: Read 0x1fac7de1, calculated 0x7aa454e1 jffs2_get_inode_nodes(): Data CRC failed on node at 0x01367a78: Read 0x7eb2a715, calculated 0x0a98a909 jffs2_get_inode_nodes(): Data CRC failed on node at 0x013647a0: Read 0x65b0162a, calculated 0xb54a19e2 ixp425_eth: Starting IXP425 Ethernet Driver V2.5 Built Mar 2 2007 14:30:06 yakima: Starting Yakima Board Driver V1.0 Built Mar 2 2007 14:32:42 S35380A: I2C based RTC driver. S35380A: found s35380a on Already in 24hr mode. No Need to set CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 checking for language cfgconvert: Conversion completed ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (1024 buckets, 8192 max) - 324 bytes per conntrack ip_conntrack_pptp version 1.9 loaded ip_nat_pptp version 1.5 loaded ipt_recent v0.3.1: Stephen Frost . http://snowman.net/projects/ipt_recent/ /lib/modules/2.4.20_mvl31 init_module: arp_tables /lib/modules/2.4.20_mvl31 init_module: arptable_filter Network Kernel/User communications module 0.04 NET3: PFKEY sockets 0.01 for Linux NET3.035. WatchGuard IPSEC 2.0 (C) 1998-2006 WGTI NET4: Ethernet Bridge 008 for NET4.0 Bridge firewalling registered RTNETLINK answers: No such file or directory RTNETLINK answers: No such file or directory RTNETLINK answers: No such file or directory iptables: No chain/target/match by that name (/sbin/iptables -t filter -D edge_input -p 17 -i eth0 --sport 67 --dport 68 -j account_accept ) iptables: No chain/target/match by that name (/sbin/iptables -t filter -D edge_output -p 17 -o eth0 --dport 123 -j account_accept ) Error opening /etc/wg/certs/cacert.pem: No such file or directory Error opening /etc/wg/certs/wgcert.pem: No such file or directory Error opening /etc/wg/certs/wgpvk.pem: No such file or directory iptables: No chain/target/match by that name (/sbin/iptables -t filter -D edge_input -p 6 --dport 4110 -j account_accept ) ipseccfg[142]: WatchGuard IPSEC Configurator v7.4.1.B1000 (C) 1996-2006 WGTI ipseccfg[142]: Firewall device file descriptor environment variable not set ipseccfg[142]: Opened firewall device explicitly (/tmp/firewall) iptables: No chain/target/match by that name (/sbin/iptables -t filter -D edge_input -p 6 -i eth1 -d 192.168.111.1/32 --dport 443 -j account_accept ) iptables: No chain/target/match by that name (/sbin/iptables -t filter -D edge_input -p 6 -i ipsec0 -m mark --mark 0xc00 -d 192.168.111.1/32 --dport 443 -j account_accept ) iptables: No chain/target/match by that name (/sbin/iptables -t filter -D edge_input -p 6 -i ipsec0 -m mark --mark 0xc01 -s 192.168.111.0/24 -d 192.168.111.1/32 --dport 443 -j account_accept ) iptables: No chain/target/match by that name (/sbin/iptables -t filter -D edge_input -p 6 -i eth2 -d 192.168.112.1/32 --dport 443 -j account_accept ) iptables: No chain/target/match by that name (/sbin/iptables -t filter -D edge_input -p 6 -i ipsec0 -m mark --mark 0xc00 -d 192.168.112.1/32 --dport 443 -j account_accept ) iptables: No chain/target/match by that name (/sbin/iptables -t filter -D edge_input -p 6 -i ipsec0 -m mark --mark 0xc01 -s 192.168.112.0/24 -d 192.168.112.1/32 --dport 443 -j account_accept ) ipseccfg[142]: mfg_read_serial: returning [7072149441A87] ipseccfg[142]: WARNING - No remote gateways configured ipseccfg[142]: ACTION - To create a VPN, configure a gateway ipseccfg[142]: WARNING - IPSec configuration failed, only restart and uds commands will be processed ipseccfg[142]: get_external_interface_ip: unable to determine external ip addresss